LAUDA Proline Kryomat RP 3090 CWCooling thermostat 208 V; 3/PE; 60 Hz L001698

LAUDA Proline Kryomat RP 3090 CW Cooling thermostat 208 V; 3/PE; 60 Hz Features: Thermostatic bath/circulator with latest microprocessor technology and integrated cooling system Back-lit graphic LCD display with high resolution and different display modes Additional green LED display for temperature Input either via cursor keys, numeric soft keys or both. Additional Tmax key for overtemperature Command console can be detached and used as remote control EasyUse system for simple operation of the whole unit SelfCheck Assistant for system diagnosis Fully electronic continuous controller with PID action for internal & external control PowerAdapt system for the use of the maximum possible amount of heat permitted by the power supply system Low level and overtemperature protection for use with non-flammable liquids Optically decoupled RS 232/485 interface integrated as a standard Option for upgrading with up to 2 interfaces (RS 232/485, Profibus, analogue or contact modules, Ethernet-USB module) Programmer with 150 temperature/time segments that can be separated into 5 programs Timer function for switching on the thermostat, entering the standyby mode or running of programs LAUDA Vario pump with 4 selectable output steps Adjustment of bath circulation according to application Pump connectors on the side and in the back, installed bypass With addional pump for external application (Thread M 30 x 1.5 O) SmartCool system for energy-saving digital cooling management including compressor on-off control Electronically-controlled heating of bath edge and bath bridge prevents moisture in the atmosphere from condensing and freezing at low temperatures Condenser cooling Water Utilises traditional refrigerants (HFCs) in accordance with European legislation to control F-gases (EU) 517/2014 Technical Features (according to DIN 12876): Working temperature range: -90 ... 200 °C Ambient temperature range: 5 ... 40 °C Temperature stability: 0.01 ±K Heater power max.: 3 kW Power consumption max.: 7 kW Power consumption: 25 A Pump Pressure max.: 3.2 bar Pump flow rate pressure max.: 40 L/min Bath volume min. / max.: 23.0 / 31.0 L Size of bath (W x D x H): 350 x 200 x 250 mm Recommended cooling water temperature: 15 °C Cooling water flow rate: 11.7 L/min Maximal pressure cooling water: 10 bar Overall dimensions (WxDxH): 600 x 700 x 1216 mm Power supply: 208 V; 3/PE; 60 Hz Power plug: Power cord without plug (AWG) Cooling Capacity: 200 °C (2); Thermal oil; 4 kW 20 °C (2); Ethanol; 3.8 kW 0 °C (2); Ethanol; 3.5 kW -20 °C (2); Ethanol; 2.9 kW -30 °C (2); Ethanol; 2.5 kW -40 °C (2); Ethanol; 1.8 kW Standard Accessory: 1 Bath cover 4 screw caps, 4 closing plugs 2 nipples 13 mm for pump connectors