LAUDA PRO RP 290 ECCooling heating circulator 230 V; 50 Hz L002611

LAUDA PRO RP 290 EC Cooling heating circulator 230 V; 50 Hz Features: Thermostatic circulator with latest microprocessor technology. Integrated cooling system Large 5,7" Multi-Touch-Color display Operation with multi touch display Command console can be detached and used as remote control User administration for up to 20 user Data in- and export via USB Timer und count-down-function EasyUse system for simple operation of the whole unit SelfCheck Assistant for system diagnosis USB and Ethernet interface equipped as standard Retrofittable for upgrading with interface (RS 232/485, Profibus; EtherCAT; analogue or contact modules) Fully electronic continuous controller with PID action for internal & external control PowerAdapt system for the use of the maximum possible amount of heat permitted by the power supply system Low-level and adjustable over-temperature protection with acoustic alarm for use with flammable and non-flammable liquids Programmer with up to 100 programs, up to 50 segments each Tower design with small footprint LAUDA Varioflex pump (pressure/suction) with 8 selectable levels, connections rear Low filling volume enables rapid changes in temperature Bath vessel made of stainless steel (insulated, with overflow and drain tap) SmartCool system for energy-saving digital cooling management including compressor on-off control Hybrid cooling system: (heat removal complementary with cooling water) Utilizes natural refrigerants Technical Features (according to DIN 12876): Working temperature range: -90 ... 200 °C Ambient temperature range: 5 ... 40 °C Temperature stability: 0.05 ±K Heater power max.: 2.5 kW Power consumption max.: 3.7 kW Power consumption: 16 A Pump Pressure max.: 0.7 bar Pump flow rate pressure max.: 22 L/min In / Outlet connection thread (outside): M16x1 In / Outlet Ø olives: 13 mm Filling volume min.: 2.4 L Filling volume max.: 4.4 L Overall dimensions (WxDxH): 390 x 600 x 685 mm Power supply: 230 V; 50 Hz Power plug: Power cord with angled plug (BS1363) Cooling Capacity (pump stages): 20 °C (8); Ethanol; 0.8 kW 10 °C (8); Ethanol; 0.77 kW 0 °C (8); Ethanol; 0.74 kW -10 °C (8); Ethanol; 0.72 kW -20 °C (4); Ethanol; 0.7 kW -30 °C (4); Ethanol; 0.68 kW -40 °C (4); Ethanol; 0.64 kW -50 °C (4); Ethanol; 0.56 kW -60 °C (4); Ethanol; 0.39 kW -70 °C (4); Ethanol; 0.21 kW -80 °C (4); Ethanol; 0.09 kW -90 °C (2); Ethanol; 0.01 kW Standard Accessory: 2 screw caps, 2 closing plugs 2 nipples 13 mm for pump connectors 2 nipples 10 mm with screw cap G3/8 for cooling water